Description
- NEW -
GENERAL FEATURES:
Machine frame and worktable
* Steel structure with electrical control cabinet at the front of the machine
* Insert the sanding belts from the left-hand side of the machine
* Motorised table height adjustment
* Main motor integrated in the machine frame
Electrical equipment
* Electromechanical control panel on the front left-hand side of the
Machine
* Automatic star-delta starting for the main motor
* Motor protection switch for the motors
* Motors in insulation class IP 54
Emergency and protective devices
* Safety microswitch for excess thickness
* Automatic brake for immediate stopping of the units
* Emergency stop safety edge in the workpiece infeed
* Mushroom switch in the workpiece infeed and outfeed
* Lockable main switch
* Automatic emergency shutdown of the machine in the event of
- Sanding belt breakage
- non-tensioned sanding belt
- Protection against lateral movement of the sanding belt
- Compressed air shortage
- Overload of the main motors
Note: the standard version with 400 V 50 Hz requires a three-phase power supply + neutral conductor + earth wire.
If the 400 volt power supply is without a neutral conductor, a single-phase transformer from the price list must also be ordered. The same transformer must also be ordered for a machine with a voltage higher than 400 volts, regardless of whether a neutral conductor is present or not.
The machine version with 220 or 230 volts (50 or 60 Hz) is available at extra cost (see price list).
BASIC MACHINE STANDARD EQUIPMENT
- R140/85 rubber-coated calibration roller diam. 140 mm 85 Sh - 1st pos.
- R160/45 rubber-coated sanding drum diam. 160 mm 45 Sh - 2nd pos.
- Hard sanding pad with manual adjustment of the working height
- Main engine 11 kW (15 hp)
- Electronic ammeter for the main motor to display the
Power consumption
- Electronic display of the working height
- Electronically controlled sanding belt oscillation
- Rubber pressure rollers
- Non-return valve in the inlet before the first unit
- Rubber feed carpet 60 Sh
- Roller table with two rollers in the infeed and outfeed of the worktable
- Carpet feed with two speeds 4.5 / 9 m/min with
Geared motor
- Automatic carpet centring
Working width mm 1,100
Min./Max. working height mm 4 - 170
Sanding belt width mm 1,115
Sanding belt length mm 2,150
Main engine power kW (PS) 11 (15)
Gear motor kW (hp) 0.45/0.8 (0.6/1.1)
Feed speed m/min 4.5/9
Consisting of:
10.90.87 European safety regulations (symbol C.E.)
93.07.31 Volt 400 EU
93.12.01 Frequency 50 Hz
44.44.19 Version "B" for RCS
33.31.50 Roller table in infeed and outfeed for long workpieces
62.44.50 10″ control panel with "eye-S" software integration
31.21.60 "RA" angular ribbed steel contact roller - 1st unit
97.50.71 Main engine 15 kW (PS 20)